Support V101
Download Camp Snap Instruction Sheet
ONLY INSTALL THIS SOFTWARE IF YOUR CAMERA IS A V.101. IF YOUR CAMERA DOES NOT HAVE A RED 3 DIGIT LED PHOTO COUNTER THEN THIS FIRMWARE WILL PERMANENTLY BREAK YOUR CAMERA AND WILL VOID THE WARRANTY.
Firmware Updates:
**** ONLY INSTALL ONE UPDATE AT A TIME -- IF YOU COMBINE YOU WILL BRICK YOUR CAMERA ****
Update Instructions:
In the zip folder you downloaded you'll see 3 file:
ISP.BIN
1628.BIN
DRAMPARA.txt
Copy the ISP.bin file to the root directory of the Camp Snap camera's tf card FIRST.
Then copy over the other two files. This will ensure the camera will not brick during the update process in case of a disconnection issue while copying the files over.
Make sure you see ISP.bin in the root folder before copying over 1628.bin.
Turn on your Camp Snap. "---" will display for about 20 seconds and it will power off. Do this a second time. Once it has powered off again, your Camp Snap has been successfully updated.